First, start up the mCamView program from Start -> Programs -> mCamView. Then, doing the following steps.

1. Add a camera

1.1 Either click Options -> Add or right click on the screen and click Add.

1.2 Enter the CamID and Password of the IP camera and give a name for this camera and click OK button.

2. Play the video

2.1 Make sure the Mobile can connect to internet through 3GPP.

2.2 Double click on the camera item to connect to the IP camera.

2.3 Once the connection has been established, mCamView invokes the built-in streaming player to play the video.

2.4 For pan/tilt type IP camera, you can press the left/right and up/down buttons to do the pan/tilt movement.

3. Change the video settings

3.1 Right click on the camera item and choose Video settings.

3.2 The current video settings will be displayed and change the settings as you want. Then click Update button and enter the admin username and admin password to update the settings.

4. Delete the camera

4.1 Right click on the camera item and choose Delete.

5. Exit the mCamView

5.1 To be noticed, the X button in the upper-right corner is a minimize button, not an exit button. To exit the mCamView correctly, please click on the Exit button in the bottom-right corner.

5.2 If the mCamView is minimized, you can get mCamView back to maximized state by starting mCamView again. If that does not work, please go to Start -> Settings -> System tab -> Memory (or Task Manager) and double click on mCamView to get it back maximized.